Pre-Painting Galvanized Roofing Sheet

Pre-Painting Galvanized Roofing Sheet uses galvanized coil as the base material, which is sprayed with paint and pressed by a tile press. The more popular colors are red, black, blue, green and gray. Common types are T-type and corrugated, and glazed tile type has also become popular recently.

 

Pre-Painting Galvanized Roofing Sheet uses galvanized coil as the base material, which is sprayed with paint and pressed by a tile press. The more popular colors are red, black, blue, green and gray. Common types are T-type and corrugated, and glazed tile type has also become popular recently.

 

Common product specifications

Common thickness is 0.12mm-1.5mm;

Common width is 665mm/840mm/800mm/850mm/900mm/1000mm/1200mm/1250mm, and width can also be customized; 

Common length is 2000mm/2400mm/2500mm/3000mm/3500mm/4000mm/5000mm/5800mm/6000mm, and  length can also be customized; 

The common top coat film is 10-13u, and the highest can reach 20-25u;

The common back coat film is 5-7u, and the highest can reach 20-25u.

The common zinc layer of the substrate is 40g/m³, and the zinc layer can be customized if the quantity is large.

 

Product application

Pre-Painting Galvanized Roofing Sheet is commonly used in the construction and transportation industries; such as roof panels, kiosks, blinds, refrigerators, car ceilings, roadside panels, car shells, partition boards, etc.

 

Product advantages

The product is also lightweight, beautiful and has good corrosion resistance, making it used in many fields such as advertising, transportation industry. 

Compared with similar products, it has lower cost and higher cost performance.

Pre-Painting Galvanized Roofing Sheet can reduce damage less in the event of a natural disaster and has a higher possibility of reuse.

 

Product market development trends and prospects

Pre-Painting Galvanized Roofing Sheet 's extended products are very popular in Africa, Chile, Congo,Samoa. Corrugated sheets are popular in African countries, glazed sheets are popular in South Africa, and T-shaped sheets are also popular in South American countries such as Chile.

 

Product quality inspection process

Main inspection steps for roofing sheets:

1: Whether the width, length and thickness after molding meet the requirements.

2: Whether the cutting edge is smooth and burr-free.

3: Whether the paint surface is smooth and beautiful.