Drill Pipe Screen

Dill pipe screen is the screen that is used in the Oil & Gas drilling industry. There are two types of screens: High flow retrievable (rod type) and Low flow non - retrievable (12" cone shape). The high-flow rod type retrievable screens are capable of handling up to 800 GPM or more in 4 1/2" and 5" sizes. The 3 1/2" and 4" can handle up to 300 GPM. They also have the added ability to be fished out using a standard slickline unit with an overshot if you are stuck with the kelly connection below the rotary table.

Our low-flow model in sizes 4" and 4 1/2" is capable of handling up to 325 or more GPM and is not retrievable thru the kelly nor drill pipe.

Drill pipe screen features:

• Screen Cap: Open Area allows easy materials removal.
• Screen Cap Extension: Controls turbulance over spear point for increased wear.
• Spear Point: Connection makes flush with bevel to reduce cavitation for increased wear resistance.
• Material Pattern: Staging of whole pattern increases wash resistance.
• Flanges: Engravings that are easy to read.

Drill pipe screen specifications:

Catalog # Drill Pipe Size KS-16-CS-Burgundy 27/8 AM PAC & 27/8 XH KS-18-CS-Gold 27/8 IF, 31/2 SH, 27/8 AM OH KS-19-CS-Silver 31/2 XH, 31/2 FH KS-20-CS-White 31/2 IF, 31/2 XH KS-21-CS-Brown 4 FH KS-23-CS-Orange 4 IF KS-24-CS-Green 41/2 FH KS-26-CS-Black 51/2 FH, 61/2 FGm 65/8 R KS-28-CS-Gray 41/2 XH 16.60-20# KS-29-CS-Red 41/2 XH 16.60# KS-31-CS-Blue 41/2 IF, 5 XH KS-21-A-Yellow 41/2 IF, 5 XH 25.6 0 20" Long Strainers 14 Guage KS-27-2014 41/2 XH NC 46, 22.82# KS-31-2014 41/2 IF, 5 XH, 25.60#

Drill Pipe Protectors & rubber wipers:

• Stainless Steel Screen 3”1/2 .
• 3-1/2 IF.
• 13.30 Lbs FT.

Stainless Steel Screen for Drill Pipe 5” .

• 4-1/2 IF.
• 19.50 Lbs FT.

Stainless Steel Screen for Drill Pipe 5-1/2” .

• 5-1/2 IF.
• 21.90 Lbs FT.