Pre-washing fabric is exactly what it sounds like: washing the fabric before you cut into it and start sewing. You may think that you can skip this step, however not washing your fabric before cutting into the fabric can lead to a disaster! Read on to find out exactly why you need to pre-wash fabrics and how to pre-wash your fabrics. Enjoy!
The simple answer to this question is yes, you should pre-wash your fabric before sewing in most cases. And why should you pre-wash your fabrics? There are two main reasons why you should not skip this step before cutting into your fabric:
Have you ever washed a piece of clothing, only to pull it out of the washing machine twice as small as it was when you put it in? Well, that’s what could happen to your make when you wash it for the first time without pre-washing.
Fabrics shrink because they are woven or knitted under tension, and when submerged in water during washing this tension is released before the fibers retract and become smaller.
Natural fibers like cotton and linen are especially prone to shrinkage due to their moisture-retaining properties. Cotton fabrics can shrink to around 5% of the original size, but shrinkage of up to 10% is not uncommon for some fabrics.
This is why we recommend pre-washing your fabric before sewing, so you can work with the true size of the fabric and prevent large amounts of shrinkage when you wash your final product.
We also recommend pre-washing fabrics to wash out any excess dyes left over from the manufacturing process. This is especially necessary for fabrics which are vibrantly colored (especially red fabrics). Red dyes are notorious for bleeding, so make sure to wash red fabric separately so the contents of your washing machine doesn’t turn pink!
A lot of fabrics are also given starch treatments at the end of the manufacturing process, which gives the fabric a stiff and slightly coarse texture. Pre-washing the fabric will remove this starch and allow you to work with the true texture.
While fabrics made from synthetic fibers like polyester and nylon will not shrink, we recommend that you do a pre-wash anyway in order to get out any remaining chemicals from the fabric and to get rid of any excess dye that could bleed in a future wash.
If you don’t plan to wash your final product (like small pouches or bags), then you can skip pre-washing.
As all of the fabrics that we carry at Kokka Fabrics are made from natural fibers, please carefully pre-wash all of our fabrics before you start sewing with them.
The general rule of pre-washing fabric is to wash it the way you intend to in the future. So if you plan to wash your fabrics in a washing machine, then use the same method when pre-washing. When using a washing machine, make sure to put it on the gentlest cycle, ideally on the delicate setting.
You don’t need to use detergent when pre-washing fabric, but if you choose to do so, then use around one quarter of the amount that you usually use to launder clothing.
If you are washing your fabrics by hand, completely submerge the fabric in water and squeeze gently to remove air bubbles. Leave the fabric to soak for around 45 minutes to an hour, depending on the size of the fabric.
Whether you choose to wash your fabrics in the washing machine or by hand, you’re probably wondering what’s the best way to prevent fraying during the washing process. The movement from a washing machine can cause the raw edge of the fabric to fray, causing unraveling.
In order to prevent your precious fabrics from fraying while you pre-wash them, we recommend that you baste the raw edges of the fabric.
If you have one at hand, you can put your fabric into a mesh laundry bag to further protect the fabric if you are putting it in a washing machine.
When you have finished washing your fabric, gently squeeze the excess liquid out. Do not wring the fabric, as this can damage the fibers and cause wrinkles. Air dry the fabric until it’s half dry and press the fabric with an iron.
In general, we think it’s best to avoid dryers so as this will help extend the life of your fabrics.
Here are some more tips we have about pre-washing fabric:
Wash by itself or with similar colors. You don’t want the excess dye to transfer onto your favorite piece of clothing!
Don’t overfill the washing machine with fabric and other clothing. It may be tempting to try and bulk wash of your fabric in one go, but an overstuffed washing machine can cause rippage to your fabrics.
If you want to speed up the drying process, put your fabric in a mesh laundry bag and set the washing machine to a gentle spin cycle.
Now you’re ready to start pre-washing your fabric! While it may be tempting to skip this step, we believe that you’ll get the best results from your sewing if you take the time to pre-treat your fabrics. If you have any questions about this article, or just want to say hi, then go to our Contact Us page where we will be happy to help you.
The interior surface of the tank should be a smooth, cleanable surface. Any internal components that are not essential to the manufacturing process should be removed, if possible, to avoid blind spots or “shadows” that might be blocked from exposure to the cleaning solution. For best results, all corners should have a radius and all weld seams should be located on flat areas, not in the corners.
Take additional care to ensure that all port locations and recesses inside the tank are sufficiently exposed to the cleaning solution, which can be difficult to reach and may receive inadequate cleaning as a result. All spray devices should be located and oriented so that the cleaning solution is directed precisely at the intended location with sufficient flow and pressure.
Without adequate volume or force, the cleaning solution is unable to do its job. For example, spray devices are commonly installed to direct their spray upward to the top of the tank so the solution can clean the sides as it cascades downward. Frequently there is far too little volume supplied to the spray device and as a result, the top of the tank is well cleaned but the rest of the tank is poorly cleaned. The remedy for this common mistake is to increase pump capacity to provide enough flow and pressure to the device.
Your process system may also contain other equipment that may not be easily CIP-able.
Your cleaning system designer will evaluate each component, including:
And determine whether they can be cleaned in place adequately.
Some equipment may require installing a custom piping component or removing some elements of the circuit completely in order to facilitate cleaning in place.
Due to the complex knowledge required to properly analyze your system’s piping, valves, and tanks for CIP System installation, it’s important to partner with a company that knows CIP design and is an expert in process systems to ensure all areas of your process system are correctly cleaned.
Please visit our website for more information on this topic.
Are you interested in learning more about wool felt wholesale? Contact us today to secure an expert consultation!