The use of Bead mill precautions【EVERGRINDING】

The use of Bead mill precautions【EVERGRINDING】. Safe operation:2. Regular maintenance: 3. Ventilation:. Grinding discs and abrasives selection: Equipment cleaning:6. Lubrication: 7. Oil tank and filter maintenance:8. Thermal relay reset: 9. Equipment maintenance: 10. Check wearing parts:11. Wear protective equipment: 12. It is strictly prohibited to drag and move: 13. Clean the site and machinery

The use of Bead mill precautions【EVERGRINDING】

Bead mill is also known as ball mill, grinding equipment, grinding machine, sand mill, horizontal grinding machine, vertical bead mill, rod pin ball mill, nano color paste grinding machine, laboratory bead mill, usually used to grind pharmaceutical pesticides, grinding nano color paste, grinding slurry, grinding ceramic ink, grinding powder, grinding textile dyes, grinding paint and so on

The use of bead mill precautions:
1. Safe operation: It must be operated in accordance with the instructions to ensure the safety of equipment and personnel.
2. Regular maintenance: Regularly check whether the equipment is in normal operation, and repair it in time if there is an abnormal situation.
3. Ventilation: The use of sand mill to ensure that the surrounding air circulation, to avoid dust accumulation caused by explosion or health hazards.
4. Grinding discs and abrasives selection: The use of grinding discs and abrasives suitable for processing materials can improve processing efficiency and product quality.
5. Equipment cleaning: After the material is processed, the equipment should be cleaned, so as to facilitate the next processing of materials and ensure that the equipment will not be blocked.
6. Lubrication: After cleaning the equipment, it is best to add some lubricating oil to the lubricating part of the equipment, so as to avoid rust of the spindle and oil cylinder.
7. Oil tank and filter maintenance: the oil in the box of the sander is best replaced half a year, and the oil tank should be cleaned regularly. The filter is best cleaned once a month.
8. Thermal relay reset: If the heat relay action is stopped due to overload, the "reset" button in the thermal relay should be pressed to facilitate subsequent operation.
9. Equipment maintenance: The use of the sander equipment is best to be repaired once a year, the contactor at the AC is best to be repaired once a year, and the appropriate replacement.
10. Check wearing parts: regularly check the abrasive parts, such as oil seals, bearings, etc., if found wear phenomenon should be immediately replaced and repaired.
11. Wear protective equipment: the operator should wear labor protective equipment before operation. Can not leave the post without authorization, strictly in accordance with the requirements of the regulations to operate, prohibited illegal operations.
12. It is strictly prohibited to drag and move: when the machine is working, it is strictly prohibited to drag and move.
13. Clean the site and machinery and equipment: After the work is finished, clean the site and machinery and equipment, and clean the parts of the sand mill, and the necessary parts should be lubricated accordingly.

The main technical and management staff of EVERGRINDING have been engaged in the development and production of ZrO2 ceramic grinding media and grinding equipment ball mills for more than 20 years.

If you need help, please contact us. Thank  you.tony@evergrinding.com