Single Pane Glass Windows vs Insulating Glass Windows: Which One to Choose?

The double pane type has two layers with an insulating substance, such as argon gas, between the layers, as well as spacers that add further insulation around the edges.

 

Insulating glass, also known as double glazing, is assembled in the following steps -

 

Laminated or toughened glass between 3 mm and 10 mm thick is used to create double glazed windows. Two or three panes are used to create double or triple glazed windows.

 

Double or triple glazed panes are further separated by "spacers". Spacers are defined as pieces of metal that separate the panes of glass in an insulated glazing system in order to create a seal in the gas space between them.

 

Triple Glazing Insulated Glazing Units

 

The spacers are drilled and filled with a desiccant such as silica gel. The desiccant helps to absorb any kind of water vapour that may be present in the gap. These holes are then sealed with a sealant.

 

The glass panels are now set along the sides of the spacer strips and pressed using an automatic pressing device.

In the final step, the sealant is applied to the outside of the double glazed panel. The insulating glass panel is now ready.

 

What is single glazing?

 

Single pane glass is used to construct single pane types. These have only one pane of glass and are usually seen in older structures. Due to their single pane construction, they lack insulation and therefore the temperature of your home will vary with the weather. As a result, your HVAC system will have to work more to keep your home warm, which can increase your energy bills. If you live in an area with high temperatures, it can really do more harm than good.

 

What is double glazing?

 

The double pane type has two layers with an insulating substance, such as argon gas, between the layers, as well as spacers that add further insulation around the edges. They are much more energy efficient than a single type and help to keep the temperature in your home more consistent throughout the year. It is ideal for all climates except for cold ones. Although they have a higher upfront cost than other types, homeowners recoup their outlay with lower monthly energy costs, making them a wise investment for any home.

Safety Double Glazed Tempered Low E Insulated Glass

 

The difference between single and double glazing

 

The main difference between the two types is that the former has only one layer, while the latter has two layers, usually separated by a layer of argon or krypton gas. Both are available in a variety of styles and in most cases are interchangeable in appearance. When deciding between the two, there are some essential differences to bear in mind.

 

Applications: The most common type used in most structures is the single layer, while the double layer is mainly used for energy efficiency in buildings. One of the most important design requirements for sustainable buildings and green buildings is the insulation or double requirement.

 

Durability: Double glazing is more durable than the other variants because they include an extra piece of glass. Durability is particularly important if you live in a place with severe weather, such as high winds and precipitation, as the less durable it is the more vulnerable it is to damage.

 

Energy efficiency: Because there are two layers instead of one, double glazing is much better at insulating. Thanks to the enhanced insulation, the room temperature is better regulated and more energy is saved.

 

Lifespan: The average lifespan of a double pane and a single pane is 15 to 20 years. However, as double glazing contains an extra layer of glass, they are usually less urgent to repair when they break, so in some cases they may last longer than a single pane.

 

Curved Insulated Glass Units

 

Environmental benefits: While you can save on electricity costs, the dual type is also good for the environment. In the USA alone, the burning of fossil fuels generates more than two thirds of the electricity used. This results in over 2,000 metric tonnes of CO2 being emitted into the atmosphere. If you use double glazing, your heating and cooling equipment will not have to work as hard, which means you will use less electricity and emit less CO2.

 

Insulation: As single glazing has only one layer, they are not as effective at insulating your home from external noise and temperature as the dual option. If you live in a calm area with a mild climate, the former may be sufficient. If you are concerned about noise and other external factors affecting the comfort of your home, then the latter is the way to go, but it is worth noting that even the double type will not completely block out all external sounds and temperatures.

 

Easy to install: The single-layer type is much lighter than the double-layer type, making it easier to install. Simpler installation may save you money by reducing labour costs.

 

Which is more suitable for your needs?

 

Single layers are the least desirable option due to the lack of insulation. They don't keep cooler air in cooler areas or allow heat from outside into hotter areas, forcing your air conditioning to work more to keep your home comfortable. For most homes, a double layer with an insulator such as argon is ideal.

 

Enquire Now for Insulated Glass Unit Price.